|
Performance Software
Landshark is proud to offer custom software
for your BMW developed by Motronic expert Jim Conforti. These chips provide the ultimate in performance in the software market today. The modified Motronic software, optimized for 91 or higher octane gasoline, adjust the ignition timing and fuel curves which results in increased performance. We feel that Jim Conforti chips provide the best performance throughout the entire rpm range. Along with performance increases in both torque and horsepower, Jim Conforti chips provide the maximum competitive advantage through raised engine rev-limits and removed top speed limiters.
Jim Conforti software comes in three applications, depending on the year of the BMW 3 Series you own. Click on the application that matches up with your model year BMW.
One of the most popular applications of performance software is to install it in
combination with Cold Air Intake and performance
exhaust systems to maximize power gains.
Performance Chips '92-95 (return to top)
The Jim Conforti engine chips adjust the ignition timing and fuel curves which results in increased performance. We feel these chips provide the most horsepower and usable torque of any chip on the market. For 92-95 BMW models,
must use 91 octane or higher gasoline.
- Increases Horsepower and Torque
- Removes Top Speed Governor
- Raises Rev-Limiter
- Easy to Use and Easy to Follow Instructions
|
 |
Shark Injector™ '96-00 (return to top)
 |
Up to
34hp/40lb-ft increase on 96-99 BMW M3*
'96-00 Shark Injector Conforti Performance Engine Software represents the most cost-effective approach to increasing engine performance. It has been dyno-tested to provide a safe increase in power by altering fuel enrichment, cam timing and ignition timing specifically for use with premium gasoline. Conforti OBD-II Performance Engine Software also provides an increase in the factory rev-limit allowing for optimum shift points for maximum acceleration. Not only do we re-map part-throttle fuel and spark, we also re-map other areas of chips other tuners don't touch - such as acceleration enrichment, transition fueling (how the car responds to rapid change in pedal, and VANOS control as needed to optimize the vehicle for operation on premium fuel.
- Increases Horsepower and Torque
- Removes Top Speed Governor
- 5 Minutes to Install / Uninstall
- Raises Rev-Limiter
- Easy to Use and Easy to Follow Instructions
* Numbers are corrected to crankshaft
hp/trq NOT to stock hp/trq
|
Shark Injector™ '01-on (return to top)
Jim Conforti Performance Engine
Software represents the most cost-effective approach to increasing engine
performance. It has been dyno-tested to provide a safe increase in power
by altering fuel enrichment, cam timing and ignition timing specifically
for use with premium gasoline. Our OBD II Performance Engine Software also
provides an increase in the factory rev-limit allowing for optimum shift
points for maximum acceleration. This do-it-yourself engine software
programming tool changes programming in about 5 minutes and is completely
reversible, meaning your dealership with the best of intentions won't
accidentally remove your performance software when uploading a dealer
update!
- Increases Horsepower and Torque
- Removes Top Speed Governor
- Raises Rev-Limiter
- Easy to Use and Easy to Follow Instructions
|
 |
|
